Difference between revisions of "Varrier screens"

Latest revision as of 11:08, 15 July 2008

Start the Varrier as if you were running the Mars demo:
- wall_on
- RUN_MARS
- Place the cursor in the Mars window

Activate screen isolation and modify color for optimal performance. Use the following key strokes to isolate green/pink so that it completely covers the screen. Look with right eye to optimize pink and left eye for green. Toggle the keys for optimized color.

Save the configuration: back up the current configuration file at /home/DEMO/evl/varrier/electro-current/config/

Replace the configuration output on the screen with the new configuration file by cutting and pasting in gedit or some other editor.

@@ Line 1: / Line 1: @@
-Here is where the guide to calibrate the varrier screens should reside.
+===Varrier Screen Calibration===
+* Start the Varrier as if you were running the Mars demo:
+** wall_on
+** RUN_MARS
+** Place the cursor in the Mars window
+* Activate screen isolation and modify color for optimal performance. Use the following key strokes to isolate green/pink so that it completely covers the screen. Look with right eye to optimize pink and left eye for green. Toggle the keys for optimized color.
+* Keys:
+** F9 for the combiner
+** Ctrl-Tab for test patters
+** Ctrl-Page up/down for screen selection
+** Ctrl-Shift left/right angle
+** Ctrl-Cursor up/down arrows for optical thickness
+** Ctrl-Cursor left/right arrows for shift
+* Save the configuration: back up the current configuration file at <i>/home/DEMO/evl/varrier/electro-current/config/</i>
+* Replace the configuration output on the screen with the new configuration file by cutting and pasting in gedit or some other editor.