DCInstructions

From Immersive Visualization Lab Wiki
Revision as of 16:00, 6 December 2014 by Jschulze (Talk | contribs)

Jump to: navigation, search

Contents

Director's Collaboratory Instructions

The following instructions are for running CalVR with the Future Patient demonstration on the 6x4 tiled display wall in the WAVE lab.

Turn Displays On/Off

  • Log in to head node (67.58.52.98) as user calvr.
  • In terminal window type "wall_on" on, "wall_off" for off.

Run Future Patient Demo

  • VRPN is needed to support the Gyromouse to control the green mouse cursor on the wall.
    • Make sure VRPN is running:
    • cd ~calvr
    • ./vrpn stop
    • ./vrpn start
    • VRPN needs to report "Init good."
  • Run CalVR:
    • CalVR

Other Commands

  • To use separate displays for x server: "sudo clustersep"
  • To set x server in Twinview mode: "sudo clustertwin"
  • To reboot display cluster: "sudo clusterreboot"
  • To shut down display cluster: "sudo tentakel shutdown -h now"
Retrieved from "http://ivl.calit2.net/wiki/index.php?title=DCInstructions&oldid=8094"