Difference between revisions of "Zspace Linux Fix"
From Immersive Visualization Lab Wiki
| Line 31: | Line 31: | ||
* Source code for actually measuring the light-intensity from the light sensor on the Arduino Uno (Gray). | * Source code for actually measuring the light-intensity from the light sensor on the Arduino Uno (Gray). | ||
** [[Media:ArduinoApp.zip]] | ** [[Media:ArduinoApp.zip]] | ||
| − | * | + | *A windows C++ code (visual studio 2010) that reads the Arduino commands in c++ (Kubasak). |
** [[Media:zspace-controller.zip]] | ** [[Media:zspace-controller.zip]] | ||
Revision as of 14:25, 29 January 2014
Contents |
Project Overview
The goal of this project is to create a fix for the zspace's stereo display of content, which gets mixed up from time to time. Using additional hardware external to the computer, a fix can be made which determines if the screen is correctly initialized and displaying content with the proper stereo orientation.
Arduino Info and Tutorials
Milestones
- Power the light intensity to frequency converter via an Arduino Uno.
- Obtain light intensity measurement by reading frequency from the diode.
- Write an application to read/write light-intensity to/from the Ardunio Uno by means of a tty device (e.g. "/dev/ttyACM0").
- Create a cable with the special diode fastened in place behind a polarized lens.
- Test the cable to make sure the polarized lens makes a difference when switching left/right screens in CalVR.
- Integrate code with CalVR to show proof of concept.
Known Bugs/Issues
- The ZSpace has a 50/50 chance at initializing the left and right images in an inverted manner.
- Must be detected so screens can be inverted [again] to their correct positions.
- Requires additional hardware to monitor which screen is being displayed.
- Arduino Uno serves this purpose and reports light intensity of current view back to host OS.
Hardware
- Attach the photocell using a Pin(currently programmed to Pin13) and the GND pin.
- A resistor is needed (10Kohms?).
Arduino Software
- This is the Arduino program that reads and prints a photocell reading from a pin (currently programmed to be pin13) every millisecond.
Source Code
- Source code for receiving light-intensity information from the Arduino Uno in Linux (Gray):
- Source code for actually measuring the light-intensity from the light sensor on the Arduino Uno (Gray).
- A windows C++ code (visual studio 2010) that reads the Arduino commands in c++ (Kubasak).
Developers
Software Developer
- Thomas Gray
- Matthew Kubasak
Project Advisor
- Jurgen Schulze
