Difference between revisions of "Mugic/protocol"

Revision as of 17:42, 19 February 2013 (view source) Jalange (Talk | contribs) (→‎Circle) ← Older edit		Revision as of 17:53, 19 February 2013 (view source) Jalange (Talk | contribs) (→‎Draw Commands) Newer edit →
Line 80:		Line 80:
	or more compact as <pre>xyz=<xpos>,<ypos>,<zpos></pre>		or more compact as <pre>xyz=<xpos>,<ypos>,<zpos></pre>
	In either case, the parameters <xpos>, <ypos> and <zpos> are the coordinates in millimeters. The compact form is derived from the GLSL shader language.		In either case, the parameters <xpos>, <ypos> and <zpos> are the coordinates in millimeters. The compact form is derived from the GLSL shader language.
		+	'''Note:''' using xyz positions changes the position of the model relative to the center of the model - for example, if an airplane model's center was initially in the body area, and one specifies xyz so that the previous center is now located somewhere in the cockpit area, then the cockpit has become the new centerpoint of the model. This means all translation, scaling, and most importantly rotation commands are done to the model with this centerpoint as a base. If you simply wish to translate a model within the world, use the translation command - this way a model will still rotate about its original origin.
	Colors will be abbreviated by COLOR and can be specified either separately as <pre>r=<red> g=<green> b=<blue></pre>		Colors will be abbreviated by COLOR and can be specified either separately as <pre>r=<red> g=<green> b=<blue></pre>
Line 91:		Line 92:
	</pre>		</pre>
	In either case, <alpha> specifies the alpha value as a floating point value ranging from 0 for invisible to 1 for opaque.		In either case, <alpha> specifies the alpha value as a floating point value ranging from 0 for invisible to 1 for opaque.
		+
		+	Describe textures here.
	===Point===		===Point===

---

Revision as of 17:53, 19 February 2013

Contents 1 Overview 2 Syntax 3 Variables 4 Connections 5 User Management and Preferences 6 Draw Commands 6.1 Point 6.2 Triangle 6.3 Quad 6.4 Rectangle 6.5 Circle 6.6 Ellipse 6.7 Box 6.8 Sphere 6.9 Cylinder 6.10 Pyramid 6.11 Cube 6.12 Update 7 Transformations 7.1 Rotation 7.2 Scaling/Resizing 7.3 Translation 8 group 9 Examples 9.1 Example 1 9.2 Example 2 9.3 Example 3 10 Next Phase

Overview

MUGIC defines a protocol for a standard display-independent client/server model for the generation, control, and management of graphics rendering within a multi-user environment. The first implementation for the CalVR system used on the state-of-the-art visualisation technologies developed at Calit2. This protocol will provide ease of access and an integrated development environment for research, education, performance, interaction, and presentations. It will provide an easily accessible format for integration of real-time programming softwares (e.g., Touch Designer, Pure Data, Max/MSP, Quartz, Processing, etc.) which in turn will facilitate the incorporation of state-of-the-art gesture control and algorithmic/generative processes for control of graphics on multiple displays. The protocol will also provide multi-user management and access support, as well as real-time telematic connection between multiple servers materializing an enormous potential for development of multi-site virtual reality game and performance productions.

-Server listens to both tcp and udp -UDP and TCP streams will work in conjunction and in collaboration with each other -UDP commands have a 1400 byte limit (or whatever the lower limit is of the client and server MAClayer)

User management every tcp connection has a ttl after the ttl time, the scene associated with user will be deleted

Object managment every object has an owner object can be a collection of objects

Syntax

cmd name [parameter={value,`expr`} ...]

expr is a c-style expression

Parameters

cx cy cz

red green blue alpha r g b a

Gradient { circular,linear,exp}

red2 green2 blue2 alpha2

(for linear gradient). gx gy gz (defined as a vector)

rotx roty rotz

scale

scalex scaley scalez

Variables

var name [type={float,array}] [{value,`expr`}, .....]

Variables are created as floats by default. Name of variables follow C variable rules. Variables can be used in expressions

variables of other users can also be accessed as user:variable

parameters of objects can be accessed as variables ObjectName:parameter

the value of a parameter of an object of another user is accessed as

User:ObjectName:parameter

Connections

user <username>

User Management and Preferences

pref [cmd] [parameter=value]

default object {parameter={value,`expr`], ... ]

Draw Commands

All geometry lives in a 3D space. To keep the geometry in a plane to emulate 2D, set one of the three coordinates to zero.

By convention, CalVR uses a coordinate system in which x extends to the right, y goes forward, and z is up. If a different coordinate system should be used, the ScreenConfig values in CalVR have to be changed accordingly.

All draw commands can use an optional name parameter to set a name for the geometry, which can later be referenced, for instance to update some of its parameters, such as position to move it. The name has to follow the rules for C++ variable names. Examples for valid names: test, Test, test3, test_5, test4me. Examples for invalid names: 4test, test 5, test[4]me.

In this specification, 3D positions will be abbreviated by POSITION and can be specified either separately as

x=<xpos> y=<ypos> z=<zpos>

or more compact as

xyz=<xpos>,<ypos>,<zpos>

In either case, the parameters <xpos>, <ypos> and <zpos> are the coordinates in millimeters. The compact form is derived from the GLSL shader language. Note: using xyz positions changes the position of the model relative to the center of the model - for example, if an airplane model's center was initially in the body area, and one specifies xyz so that the previous center is now located somewhere in the cockpit area, then the cockpit has become the new centerpoint of the model. This means all translation, scaling, and most importantly rotation commands are done to the model with this centerpoint as a base. If you simply wish to translate a model within the world, use the translation command - this way a model will still rotate about its original origin.

Colors will be abbreviated by COLOR and can be specified either separately as

r=<red> g=<green> b=<blue>

or more compact as

rgb=<red>,<green>,<blue>

In either case, the parameters <red>, <green> and <blue> are the coordinates as floating point numbers in the range of 0 to 1. 0 means lowest intensity, 1 means highest intensity.

If an alpha value is to be specified it can be done in one of these forms:

r=<red> g=<green> b=<blue> a=<alpha>
rgba=<red>,<green>,<blue>,<alpha>

In either case, <alpha> specifies the alpha value as a floating point value ranging from 0 for invisible to 1 for opaque.

Describe textures here.

Point

Draws a point (single pixel).

Syntax

point name=<name> POSITION COLOR

point name=<name> POSITION COLOR

Triangle

Defines vertex coordinates and per-vertex colors for a triangle.

Syntax

triangle name=<name> xyz1=<xpos1>,<ypos1>,<zpos1> xyz2=<xpos2>,<ypos2>,<zpos2>, xyz3=<xpos3>,<ypos3>,<zpos3> rgb=<red>,<green>,<blue>

triangle name=<name> xyz1=<xpos1>,<ypos1>,<zpos1> xyz2=<xpos2>,<ypos2>,<zpos2>, xyz3=<xpos3>,<ypos3>,<zpos3> rgb1=<red1>,<green1>,<blue1> rgb2=<red2>,<green2>,<blue2> rgb3=<red3>,<green3>,<blue3>

triangle name=<name> texture=<texture> s1=<point1s> t1=<point1t> s2=<point2s> t2=<point2t> s3=<point3s> t3=<point3t>

Parameters

xyz1,xyz2,xyz3: GLSL-style compact form to set all three coordinates for each vertex

rgb: GLSL-style compact form to set all three color components to be applied to all three vertices (produces single-colored triangle)

rgb1,rgb2,rgb3: GLSL-style compact form to set all three color components for each vertex

texture: sets the image texture for the triangle

s1,s2,s3: sets the horizontal axis texture coordinate for each point (lower left is point1, lower right is point2, top is point 3)

t1,t2,t3: sets the vertical axis texture coordinate for each point

Quad

Draws a quadrangle by creating an OpenGL GL_QUAD object. Note that if all four vertices are not in one plane, intersections of the quad with other geometry might produce unexpected results.

Syntax

quad name=<name> xyz1=<xpos1>,<ypos1>,<zpos1> xyz2=<xpos2>,<ypos2>,<zpos2>, xyz3=<xpos3>,<ypos3>,<zpos3> xyz4=<xpos4>,<ypos4>,<zpos4> COLOR

quad name=<name> texture=<texture> s1=<point1s> t1=<point1t> s2=<point2s> t2=<point2t> s3=<point3s> t3=<point3t> s4=<point4s> t4=<point4t>

Parameters

Analogous to Triangle

Texture points are bottom left point1, bottom right point2, top right point3, and top left point4

Rectangle

Draws a solid-colored, axis-parallel 2D rectangle. Its origin is in its geometrical center.

Syntax

rectangle name=<name> POSITION width=<width> height=<height> COLOR

rectangle name=<name> texture=<texture> s1=<point1s> etc...

Parameters

width: extent along x axis [millimeters]

height: extent along y axis [millimeters]

texture: sets image texture for rectangle

s1,s2,s3,s4: horizontal axis texture coordinates

t1,t2,t3,t4: vertical axis texture coordinates

Texture points are lower left point1, lower right point2, upper right point3, upper left point4

Circle

Draws a flat, solid-filled circle with its center at POSITION.

Syntax

circle name=<name> POSITION radius=<radius> COLOR

circle name=<name> texture=<texture> texcenters=<centerpoint s> texcentert=<centerpoint t> texrad=<texture radius>

Parameters

radius: circle radius [millimeters]

texture: image texture for circle

texcenters,texcentert: sets the horizontal,vertical texture point for the center of the circle

texrad: sets the radius of texture from center (must be <= distance between center point texture coordinate and closest edge)

Ellipse

Box

Draws a solid-colored, axis-parallel rectangular box. Its origin is in its geometrical center.

Syntax

box name=<name> POSITION width=<width> height=<height> depth=<depth> COLOR

Parameters

width: extends along x axis [millimeters]

height: extends along y axis [millimeters]

depth: extends along z axis [millimeters]

Sphere

Draws a 3D sphere. The xyz coordinates are for its center point.

Syntax

sphere name=<name> POSITION radius=<radius> COLOR

Parameters

radius: sphere radius in millimeters

Cylinder

Pyramid

Cube

Draws a cube, with specified length, width, and height.

Syntax

cube name=<name> POSITION width=<width> height=<height> depth=<depth> COLOR texture=<texture>

Parameters

width: extends along x axis

height: extends along z axis

depth: extends along y axis

texture: sets texture image for cube (cannot maniuplate texture coords)

Update

Updates one or more parameters of a shape object. The update parameters can be references to their previous values. Those parameters that are not modified retain their previous values.

Example: update name=testobject x=x+100 will move the object by 100 millimeters to the right.

Syntax

update name=<name> POSITION COLOR

Parameters

name: name of previously defined shape

POSITION: the new position for the object

COLOR: the new color for the object

Transformations

Rotation

Rotate an existing object with name <name> by <heading_degrees> degrees about the z-axis, <pitch_degrees> about the x-axis, and <roll_degrees> about the y-axis. If more than one rotation type is given, they are being applied in the following order: pitch, roll, heading.

rotate <name> head=<heading_degrees> pitch=<pitch_degrees> roll=<roll_degrees>

Successive rotation commands will overwrite (not multiply by) the previously defined rotation.

Scaling/Resizing

Scale (resize) an existing object with name <name> by a factor of <scale_xyz>. This will scale the object by equal amounts about its origin. Alternatively, non-uniform scaling is possible by scaling along each coordinate axis separately, using the sx, sy and sz parameters.

Uniform scale:

scale <name> factor=<scale_xyz>

Non-uniform scale:

scale <name> x=<scale_x> y=<scale_y> z=<scale_z>

Successive scale commands will overwrite (not multiply by) the previously defined scale values.

Translation

Translate an existing object with name <name> by a factor of <translate_xyz>. This will translate the object relative to the world origin.

translate <name> x=<trans_x> y=<trans_y> z=<trans_z>

Successive translation commands will overwrite (not add/multiply by) the previously defined translation values.

group

group name [names ... ]

Examples

Example 1

connect user1

circle name=cir1 cx=1000 cy=2000 radius=3000

sphere name=xph1 cx=1000 cy=2000 cz=3000 radius=1000

Example 2

connect user1

var var1 value=2

circle name=x1 cx=`-var1` radius=`10000/var1`

update var1 value=3000

update var1 value=5000

update var1 value=10000

update x1 cx=`var*1.5`

Example 3

connect user1

var var1 value=2000; var var2 value=2500

circle name=c1 cx=`-var1` cy=0 radius=`10000/var1`

square name=s1 cx=`var1` cy=0 width=`abs((2*var-10000/var1)/2)`

group x1 c1 s1

update x1 cx=5000

update x1 cx=7000

Next Phase

alias (e.g. alias square quad ....... )

move dur=

delete dur=

copy name= src= link name= src= transformation=

Camera Management

Lighting Management

Quad ID=X p1=0,0 p2=1,0 p3=1,1 P4=0,0 link ID=A src=X move ID= dx=.1 dy=.5 group iD=C A,B