Difference between revisions of "Zspace-config"

Revision as of 18:43, 1 November 2012

Configure a zSpace Device for CalVR in Linux

Enabling Active Stereo

• Nvidia documentation of stereo modes: /usr/share/doc/NVIDIA_GLX-1.0/README.txt
• Enable stereo:
  • sudo vi /etc/X11/xorg.conf
  • in Section "Screen": add Option "Stereo" 3
  • Create a new section like this:

Section "Extensions"
    Option "Composite" "off"
EndSection

• Run sudo nvidia-settings: verify that the refresh rate is 120 Hz
• "glxinfo -t" must show a few modes with the stereo flag set to 1
• Test with "glxgears -stereo"
• If it doesn't work, look for clues in /var/log/Xorg.0.log

CalVR Screen Configuration

The zSpace has a resolution of 1920x1080 pixels. The active screen area is 521x292 millimeters. The display is tilted 30 degrees from the horizontal axis (=60 degrees from the vertical). We want the world coordinate system's origin to be in the center of the screen. The center of the screen is about 120 millimeters above the table the zSpace sits on.

<ChannelConfig>
  <Channel width="1920" height="1080" left="0" bottom="0" comment="Main" channel="0"
   stereoMode="QUAD_BUFFER"  windowIndex="0"  name="0"  />
</ChannelConfig>

<WindowConfig>
  <Window width="1920" comment="Main" window="0" pipeIndex="0" height="1080" 
   left="0" bottom="0" name="0" decoration="false" quadBuffer="true" />
</WindowConfig>

<ScreenConfig>
  <Screen width="521" comment="Main" h="0" originX="0" originY="0" originZ="0" 
   height="292" p="-60.0" r="0.0" name="0" screen="0" />
</ScreenConfig>

<NumPipes value="1" />
<NumScreens value="1" />
<NumWindows value="1" />

<SceneSize value="521" />
<ViewerPosition x="0" y="-450" z="300" />
<EyeSeparation value="on" />
<Stereo value="true" />
<Stereo separation="64" />

CalVR Tracker Configuration

<Input>
  <TrackingSystem0 value="VRPN" >
    <Orientation h="0" p="90" r="0" />
    <Offset x="0" y="-230" z="350" />
    <NumBodies value="2" />
    <NumButtons value="3" />
    <VRPN>
      <Server value="Tracker0@skarn.ucsd.edu" />
    </VRPN>
    <Body0>   <!-- Head -->
      <Orientation h="0" p="0" r="0" />
    </Body0>
    <Body1>   <!-- Hand -->
      <Orientation h="0" p="-90" r="0" />
      <Offset x="0" y="0" z="0" />
    </Body1>
  </TrackingSystem0>
  <!--TrackingSystem1 value="MOUSE" >
    <NumBodies value="1" />
    <NumButtons value="3" />
  </TrackingSystem1!-->

  <NumHeads value="1" />
  <NumHands value="1" />
  <Head0Address system="0" body="0" />
  <Hand0>
    <Address system="0" body="1" />
    <ButtonMask system0="0x03" system1="0x00" />
  </Hand0>
</Input>

 <MenuSystem type="BOARDMENU" useHints="false">
    <BoardMenu>
      <Position distance="300" />
      <Scale value="0.3" />
      <Buttons select="0" open="1" />
      <Trigger value="DOUBLECLICK" />
    </BoardMenu>
 </MenuSystem>