Difference between revisions of "Guide to install Linux on lab computer"

Latest revision as of 15:45, 1 June 2018

CentOS 6.2

Preparation

Request static IP address in 137.110.118 or 137.110.119 subnet, suggest DNS name (find inspiration at [1])
Send DNS name to Jurgen to update data bank at [2]

Hardware

Set up computer, monitor, keyboard, mouse on lab desk
Make sure mouse is wired and optical; talk to Jurgen if not
Connect monitor via DVI or HDMI, not VGA
Connect network cable to activated Ethernet jack

Install Operating System

insert CentOS on USB thumb drive
reboot computer
in boot manager: select DVD drive to boot from USB
use default regional settings (US/English)
set root password
in time zone settings: enable NTP
instead of doing a minimum install, select "Software Development Workstation"
Configure network
start network configuration tool in System->Administration->Network
double click on connected Ethernet port
enter this computer's static IP address
net mask: 255.255.255.0
DNS server: 132.239.0.252
reboot

Configure File Server Access

Add machine's IP address to server's "exports" file
"exportfs -r" on server
Add two lines to /etc/fstab:

  137.110.118.210:/raid/ivlhome   /home         nfs     defaults        0 0
  137.110.118.211:/data	  /data         nfs     defaults        0 0

Remove from /etc/fstab to avoid conflict with new /home:

  /dev/mapper/centos-home /home                   xfs     defaults        0 0

mkdir /data
Enable NFS services:

  systemctl enable nfs.service
  systemctl start nfs.service

Open up firewall for NFS:

  firewall-cmd --permanent --add-port=111/tcp
  firewall-cmd --permanent --add-port=54302/tcp
  firewall-cmd --permanent --add-port=20048/tcp
  firewall-cmd --permanent --add-port=2049/tcp
  firewall-cmd --permanent --add-port=46666/tcp
  firewall-cmd --permanent --add-port=42955/tcp
  firewall-cmd --permanent --add-port=875/tcp

mount -a

Install Additional Library Repositories

RPM Fusion

RHEL 6 or compatible like CentOS:

sudo yum localinstall --nogpgcheck https://download1.rpmfusion.org/free/el/rpmfusion-free-release-6.noarch.rpm https://download1.rpmfusion.org/nonfree/el/rpmfusion-nonfree-release-6.noarch.rpm

RHEL 7 or compatible like CentOS:

sudo yum localinstall --nogpgcheck https://download1.rpmfusion.org/free/el/rpmfusion-free-release-7.noarch.rpm https://download1.rpmfusion.org/nonfree/el/rpmfusion-nonfree-release-7.noarch.rpm

Linuxtech

su
vi /etc/yum.repos.d/linuxtech.repo
Add this to file and save:

[linuxtech]
name=LinuxTECH
baseurl=http://pkgrepo.linuxtech.net/el6/release/
enabled=1
gpgcheck=1
gpgkey=http://pkgrepo.linuxtech.net/el6/release/RPM-GPG-KEY-LinuxTECH.NET

Install additional libraries

Install libraries which are part of CentOS:

yum -y install eclipse
yum -y install kernel-devel
yum -y install arts-devel
yum -y install freetype-devel
yum -y install freeglut-devel
yum -y install ImageMagick-devel
yum -y install ImageMagick-c++-devel.x86_64
yum -y install emacs
yum -y install screen
yum -y install gnuplot
yum -y install latex2html
yum -y install gsl-devel
yum -y install lapack-devel
yum -y install opencv-devel
yum -y install giflib-devel
yum -y install ffmpeg-devel
yum -y install gstreamer-ffmpeg
yum -y install selinux-policy.noarch
yum -y install xorg-x11-apps
yum -y install glibc-devel.i686
yum -y install libstdc++.i686
yum -y install libstdc++.so.5
yum -y install libstdc++.so.6
yum -y install freeglut-devel.x86_64
yum -y install python-devel.x86_64
yum -y install libidn-devel.x86_64
yum -y install e2fsprogs-devel.x86_64
yum -y install ncurses-devel.i686
yum -y install ncurses-devel.x86_64
yum -y install zlib.i686
yum -y install tcl-devel
yum -y install tk-devel
yum -y install xterm
yum -y install vim-X11
yum -y install telnet
yum -y install xclip
yum -y install uuid-devel
yum -y install meld
yum -y install openal-soft-devel
yum -y install freealut-devel
yum -y install libspnav-devel
yum -y install octave-devel
yum -y install pcre-devel
yum -y install recordmydesktop
yum -y install epel-release
ln -s /usr/lib64/libhdf5.so.7 /usr/lib64/libhdf5.so.6

The following libraries are not part of CentOS and will require the above listed external repos to be installed, or rely on local files:

yum -y install gkrellm
yum -y install tcptrack
yum -y install google-chrome-stable
yum -y install fltk
yum -y install fltk-fluid
yum -y install cmake28
yum -y install glew
yum -y install mysql++-devel
yum -y install mplayer
yum -y install directfb
yum -y install ntfs-3g
rpm -Uhv /home/jschulze/rpm/Cg-2.1_November2008_x86_64.rpm
rpm -Uhv /home/jschulze/rpm/mxml-2.2.2-8.el5.ccrma.x86_64.rpm
ln -s /usr/lib64/libmxml.so.1 /usr/lib64/libmxml.so

Google

Add to /etc/yum.repos.d/google-chrome.repo:

[google-chrome]
name=google-chrome - 64-bit
baseurl=http://dl.google.com/linux/chrome/rpm/stable/x86_64
enabled=1
gpgcheck=1
gpgkey=https://dl-ssl.google.com/linux/linux_signing_key.pub

Bring All Yum Packages Up To Date

yum clean all
yum -y update
reboot
If an Nvidia driver was installed before the update, it may have to be reinstalled now.

Install graphics driver

Disable default Nvidia driver (Nouveau)
- create config file: vi /etc/modprobe.d/nvidia-installer-disable-nouveau.conf
- contents for this file:

blacklist nouveau
options nouveau modeset=0

- vi /etc/grub.conf
- add rdblacklist=nouveau to all kernel entries:

kernel /vmlinuz-2.6.32-220.el6.x86_64 ro root=/dev/mapper/vg_pumice-lv_root rd_NO_LUKS 
KEYBOARDTYPE=pc KEYTABLE=us LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_pumice/lv_root 
SYSFONT=latarcyrheb-sun16 rhgb rd_LVM_LV=vg_pumice/lv_swap rd_NO_DM rdblacklist=nouveau

- Sometimes this is also necessary (not sure when it is):

mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r).img.bak
dracut -v /boot/initramfs-$(uname -r).img $(uname -r)

- reboot
on login screen: hit ctrl-alt-F2
log in as root
"init 3"
log in as root again
Install Nvidia driver:
- "sh /home/jschulze/rpm/NVIDIA-Linux-x86_64-367.44.run"
  - If installation fails with message "You appear to be running an X server": rm /tmp/.X0-lock and rm /tmp/.X1-lock
- 32 bit compatibility libraries not needed but ok to install
- yes to run nvidia-xconfig utility
reboot

Copy root's ssh keys

ssh root@sessions.ucsd.edu
cd .ssh
scp * root@<new_machine>:.ssh
exit

Add user accounts

Copy passwd, shadow and group files from sessions.
On new computer:
- cd /etc
- scp root@sessions.ucsd.edu:/etc/passwd .
- scp root@sessions.ucsd.edu:/etc/shadow .
- scp root@sessions.ucsd.edu:/etc/group .

Disable user list at login

As root type on command line:

gconftool-2 --direct --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory --type Boolean --set /apps/gdm/simple-greeter/disable_user_list True

Install Trackd (only for VR systems)

copy trackd subdirectory from Nexcave /usr/local/trackd/
copy trackd script from Nexcave's /etc/init.d/trackd
install older version of libstdc++ with .so.5 libraries, for instance libstdc++-3.3.2-2.i386.rpm

Install Printer (optional)

To install in Linux, go to System->Administration->Printing and click "New".
IP address:
Printer type: Brother