View source for Project4F16

=Project 4: Roller Coaster=

In this project, you need to create a track editor for a simple roller coaster. The roller coaster will consist of a 3D curve representing the track, and a sphere as a car. The track editor should work like the one in the [https://www.youtube.com/watch?v=hlDYJNEiYvU video shown in class].

Start with your sky box from project 3 (feel free to use different textures), along with the code to manipulate the camera with keyboard and/or mouse. 

==1. Track (30 Points)==

====Bezier Curves====

* Create ten connected cubic Bezier curves (i.e., 4 control points per curve). (20 points)
* Draw the Bezier curves by approximating them with at least 150 straight OpenGL segments each, for a total of at least 1500 line segments. (10 points)

[[Image:Curve_P4_S16.png|400px]]

Note that the screen shots are samples - your curves do not need to match the ones in these images exactly.

==2. Control Handles (30 Points)==

Make your control points editable by the user with the mouse. You need to support both the interpolating and the approximating control points. 

====Interpolating control points====

These are the control points which the curve goes through, also called anchor points (points p0 and p3 for a given curve).

* Highlight the points with spheres or otherwise to make it easy to see where they are.

[[Image:Anchor_Points_P4_S16.png|400px]]

====Approximating control points====

These control points "pull" on the curve but the curve does not go through them (points p1 and p2 for a given curve).

* Highlight these points in a similar way as the interpolating points.
* Use a different color or shape to distinguish them from the anchor points.

[[Image:Control_Points_P4_S16.png|400px]]

====C1 Continuity====
To ensure C1 continuity, you will need to support control handles like in the video. They connect the two last control points from one curve with the first two control points of the neighboring curve, and ensure that they lie on a straight line.
* Draw all eight control handles (lines).
[[Image:Handles_P4_S16.png|400px]]

====Control Point Manipulation====
* Use the control handles with the mouse to modify the control points
** To detect which control point is being modified, we will go over a few options in the discussion on Monday.
**Examples are ray casting or a [http://www.lighthouse3d.com/tutorials/opengl-selection-tutorial/ selection buffer]
* Update the shape of the Bezier curve in real-time, just like the video demonstrates.
* The control point interaction has to be intuitive: when you pull a point with the mouse it should move in the same general direction as the mouse cursor, regardless of the camera position.

'''Grading:'''

* Displaying control points (5 points)
* Selecting correct point for mouse position (5 points)
* Correct grouping for control handles (5 points)
* Correct movement based on camera view (5 points)
* Updating curve (5 points)
* Ensuring C1 continuity (5 points)

==3. Environment mapping (20 Points)==

Use the sphere code you created for project 3 to render a solid sphere. It will represent the roller coaster car. Its surface should look like polished metal, so you need to use environment mapping on it.

The [http://learnopengl.com/#!Advanced-OpenGL/Cubemaps Cube map tutorial] explains how environment mapping is done with a sky box as the environment. Feel free to follow it and use the code from the site to make it work. The goal is to have the sky box reflect on the spere, to give the impression of the sphere's surface being polished metal (i.e., act like a perfect mirror).

'''Grading:'''
* Something resembling environment mapping (5 points)
* Correct environment mapping (10 points)

==4. Physics (20 Points)==

====Sphere Movement (15 points)====

The approach to determine the velocity of the sphere is to use a friction-less energy preservation model: the sum of the potential energy (proportional to the height the sphere is at) and the kinetic energy (determined by its velocity) remains constant. In other words: the lower the sphere is the faster it goes. This way, when the sphere starts at the highest point of your roller coaster, it should go through the entire track and end up at the highest point again without getting stuck.

* Make the sphere slide along the roller coaster track like the ring in the video.

====Sphere Pause and Reset (5 points)====

* Support two buttons - they can be keyboard keys, buttons on the input device, or even a GUI widget, as you choose:
** One to pause/unpause the movement of the sphere.
** One to automatically place the sphere at the highest point of your track, with a small amount of forward momentum.

==5. Optional (10 Points)== 

There are multiple options for extra credit. Each will get you a maximum of 10 points, but you can only get a maximum of 10 points of extra credit overall.

a) '''Improved Car:''' Instead of the sphere, optionally use a 3D model that resembles a real rollercoaster car more. You can use the [http://ivl.calit2.net/wiki/images/a/a2/Pod.zip 3D pod model from the spring course], for example. The pod should always be aligned with the track: when the track descends, the pod should be tilted down, etc. The pod does not need to lean as if gravity pushes it outwards. Support a keyboard key to switch between the sphere and your pod. (5 Points)

b) '''Improved Track:''' Extend the Bezier curve to a band, to give the roller coaster a horizontal orientation and thus make it more realistic. Do this by turning the cubic Bezier curves into patches, defined by a cubic Bezier curve along the track, and a linear Bezier curve (i.e., line) perpendicular to it. Note that this is similar to Bezier patches, but those use cubic Bezier curves along both axes. Add the additional control points and control handles to allow determining the orientation of the track. Render the track with triangle strips, instead of lines. Place the sphere so that it sits in the center of the track, rather than the track going through it. (10 Points)

c) '''Improved Reflections:''' Make the environment map more realistic by reflecting the track in it, in addition to the sky box. Do this by placing a virtual camera in the middle of the sphere, with a square image and a 90 degree field of view. Then take six pictures with the camera, facing in perpendicular directions to cover all six faces of a cube. These pictures now make up your sky box from this perspective. Then use environment mapping on the pod using this temporary sky box. This process has to be repeated for every frame rendered. (10 Points)

d) '''Improved Input:''' If you own a 3D input device such as a Razer Hydra or Sony Move, or you are welcome to use it in this project as it will simplify the interaction with the control points, but this is by no means a requirement. Note that we can't provide tutoring on anything specifically related to your 3D device. (5 Points)

e) '''Improved Display:''' Render your application to a virtual reality head set. You can use the Oculus Rift HMDs or the Vive in the CSE VR lab (room B210). Let the instructor know if you need access to a Rift. You are eligible for access once you have finished parts 1-3 of this project. These [http://www.glfw.org/docs/3.1/rift.html instructions for how to run your GLFW application in an Oculus Rift] may be useful, but are probably slightly outdated. (10 Points)